Browse all practice questions for the ATC AP Characteristics Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ATC AP Characteristics Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Where are mandatory signs used?
  • What is Sequence Flashing Lights (SFL)?
  • Which statement about ASOS is true?
  • Which ASOS type includes a precipitation discriminator?
  • What must airfield diagrams show?
  • When is group form authorized?
  • AFCLS is the interface used for which control function?
  • What do Arresting Gear Markers look like?
  • Which statement reflects a controller's responsibility when using communications?
  • What color are taxiway edge lights?
  • What information do Destination Signs convey?
  • What must be done to the lighting circuits for permanently closed runways?
  • The ILS Critical Boundary Sign is installed on the back of which sign?
  • What is the standard runway length?
  • Where do the Taxiway Center Lead-Off Lights start and what is the color sequence as they exit the runway area?
  • What is the first item listed under Capacity Potential?
  • Describe the Air Traffic Activity Manager.
  • How long should ATIS messages be kept on record?
  • What is the maximum blinking rate for Aeronautical Beacons per minute?
  • Define arm/de-arm areas.
  • Which of the following is NOT a factor in sight selection for an airport?
  • In military aircraft branch codes, what does the code G stand for?
  • Do clocks on VIDS require time checks?
  • Closed taxiways are treated as ___ areas
  • Which branch uses Optical Landing Aids (OLS) as a standard visual aid for carrier landings?
  • What are the emergency VHF and UHF frequencies?
  • Describe the Visual Approach Slope Identifier (VASI).
  • What are the FAA administered and deputy administrator's callsigns?
  • Which color pattern indicates you are on the glide path?
  • In the instruction to an unnamed NAVAID fix, what does 'radial to intercept' mean?
  • Threshold markings on runways narrower than 200 feet are designed so that the overall width is what?
  • Runway Distance Remaining Signs indicate what?
  • How wide are taxiways?
  • Which FAA form in the VIDS is used as the Daily Record?
  • REIL may be configured in which orientation toward the approach area?
  • Helicopter landing area markings include the orientation of the H and the safe area is outlined by what?
  • Which sign indicates the destination of the airport?
  • Which factor is used to determine the number of runways?
  • What do Runway Distance Remaining Signs look like and what do they show?
  • Which statement accurately describes obstruction marking?
  • On a four-light PAPI system, if more white lights than red are observed, what does this indicate?
  • How long should recording be retained?
  • Who is required to fill out the FAA 7230-10?
  • What color combination represents a Seaport beacon?
  • What does 'November' signify for Aircraft Identification?
  • ATIS information is available through which delivery methods?
  • What is the minimum distance from the centerline of the nearest runway for Aeronautical Beacons?
  • What is the third item listed under Capacity Potential?
  • What does TA stand for in clearance abbreviations?
  • What color are runway markings?
  • Describe the Tower Display Workstation (TDW).
  • What is the correct rule about runway waveoff lights?
  • In FLOLS, what does the yellow ball indicate when aligned with the datum lights?
  • Which equipment suffix indicates with Mode C?
  • ASDE is used to monitor aircraft movement under which conditions?
  • How is Milages pronounced?
  • Describe the Crash Phone.
  • What are the three types of runway markings?
  • Which ATIS content item is related to identification?
  • Which feature best describes Sequence Flashing Lights (SFL)?
  • What does VIDS provide and interface of?
  • What does the Airport Surface Detection Equipment (ASDE) show?
  • Which sign marks the boundary of the ILS critical area?
  • ASOS reports at what altitude, expressed as AGL?
  • Which ATIS content item is the instrument or visual approach?
  • Which statement is true about VASI color patterns?
  • How are permanently closed helipads marked?
  • What are Directional Signs used for?
  • What does the clearance abbreviation "B" mean?
  • Which branch does the code VV represent in military aircraft designations?
  • Interpret the example Appleton zero five zero radial three radial three seven mile fix.
  • When should wind indicators be considered unreliable?
  • Which sign type is identified by yellow disks on a black background?
  • How is Flight Level pronounced?
  • What is the purpose of runway threshold markings?
  • How do runway threshold markings look?
  • The statement that runway edge lights change to yellow in the last 2000 feet of the runway in the approach direction is true.
  • What does SI stand for in clearance abbreviations?
  • What is the purpose of a compass calibration pad?
  • What is the Segmented Circle Visual Indicator System used for?
  • What does the equipment suffix "/V" mean?
  • Define runway holding positions and when they are used.
  • What is the centerline lighting spacing on Runway Centerline Lighting System (RCLS)?
  • How is Heading pronounced?
  • Which statement about airfield diagrams is true?
  • What are aircraft parking areas used for?
  • When is a horizontal line through an altitude drawn on the Flight Process Strip?
  • Where are Runway Location Signs installed?
  • What is the Search and Rescue Frequency?
  • In Movement and Control Messages prioritization, which item is second?
  • Which code denotes a TACAN Approach?
  • Runway orientation is determined by analysis of which factors?
  • Which code represents the Canadian Forces in aircraft branch designations?
  • Continuous taxiway edge markings are used to define the taxiway edge from which surfaces?
  • How do you terminate interphone messages?
  • In frequencies, which word is used to denote the decimal point?
  • Airfield diagrams must include which of the following items?
  • How is ALS setup?
  • The code R in military aircraft branch codes represents which service?
  • Which frequencies should be recorded independently of others?
  • What does the clearance abbreviation 'C' mean?
  • How are temporarily closed helipads marked?
  • 2 red, 2 white on 2-bar VASI indicate what?
  • What is the proper marking for permanently closed runways?
  • What does White over White indicate on VASI?
  • The distance from the runway edge for standard runway hold position markings is at least?
  • When is a TDW able to be used for aircraft separation?
  • What is the purpose of the Approach Lighting System (ALS)?
  • Where is FLOLS typically located on a ship?
  • When will SFL be used with ALS?
  • What does the mission prefix "RCH" represent?
  • What does PAPI stand for in aviation navigation aids?
  • Where is the master altimeter used by the DASI located?
  • Describe the Digital Altimeter Setting Indicator (DASI).
  • How is the Altimeter Setting pronounced?
  • Define a direct fueling station and when it is used.
  • What is the width of runway centerline markings on basic runways?
  • During nighttime operations, which statement best describes when runway lights should be operated for departures?
  • Which item is included in ATIS content?
  • How are Radar Beacon Codes pronounced?
  • What information is provided by Information Signs?
  • What do Runway End Identifier Lights (REIL) provide?
  • What does SA stand for in clearance abbreviations?
  • What does "E" represent for a military mission prefix?
  • In military aircraft branch codes, what does the letter A represent?
  • Replacement Flight Strip Printer (RFSP) provides what function?
  • How far are the Hold Position Markings For ILS from the centerline?
  • The light gun is used to approve or disapprove of anticipated pilot actions when radio communications are not available. Which option reflects this statement?
  • Which statement is true about the pronunciation rules for Field Elevation and Heading numbers?
  • Which ATIS content item includes laser illumination events?
  • How are serial numbers pronounced?
  • What does the equipment suffix "/L" mean?
  • Which statement best represents the acronym DIP-CC?
  • Which of the following is NOT listed as a scenario to avoid abbreviating transmissions?
  • Which six stations are part of the Emergency Communications System?
  • Which equipment suffix means Non-RVSM, GNSS, No Transponder?
  • What is the first item listed under Capacity Potential?
  • What does the letter "E" on the 7230-4 represent?
  • How are closed taxiways marked?
  • How wide are taxiway edge markings?
  • Describe a Runway Boundary Sign's appearance and purpose.
  • What is the minimum distance between Aeronautical Beacons and the control tower?
  • What is a taxiway?
  • In Movement and Control Messages prioritization, which is the highest priority?
  • Between sunrise and sunset, under what weather conditions is ALS used?
  • The ILS Critical Boundary Sign indicates what?
  • Which of the following is a valid description of TRAIL-V in airfield diagrams?
  • What best describes VISCOM in ATC operations?
  • Which code denotes ATC Clears when clearance is relayed through a non-ATC facility?
  • Which code denotes Clear As Filed?
  • What are dashed taxiway edge markings?
  • What color are crosses used to mark closed taxiways?
  • In-runway lights (Runway Centerline Lighting System - RCLS) are best described as lights...
  • What does the call sign Flight Check signify?
  • When can a red pencil be used on a Flight Process Strip?
  • Describe a helicopter landing area and their markings.
  • What is a Type 1 compass calibration pad?
  • Describe taxiway edge lines.
  • Which option correctly identifies a Civil Airport beacon color?
  • What are continuous taxiway edge markings?
  • To send an aircraft to an unnamed NAVAID fix, which phrase is correct?
  • What is counted as two operations for the Air Traffic Activity Manager?
  • What does the last Runway Distance Remaining sign (#1) mean?
  • Which of the following is NOT a classification of runway lighting systems by intensity?
  • AFCLS stands for which system?
  • When are tower visibility charts required?
  • Touchdown Zone Lights primarily help pilots identify the touchdown zone under adverse conditions. TDZL are located along the centerline starting at what distance from the threshold?
  • Define runway overrun?
  • Which color configuration indicates you are on the glide path?
  • What does 4 reds on 2-bar VASI indicate about glide path?
  • Which code denotes a Surveillance Approach?
  • What do wind indicators provide for the tower?
  • How are Time Checks pronounced?
  • Which branch is represented by the code C?
  • What does a hospital helicopter landing pad look like?
  • What does PD stand for in clearance abbreviations?
  • Which code corresponds to the Canadian Coast Guard in aircraft branch designations?
  • What do Destination Signs indicate?
  • On the FAA 7230-10, which field is designated for the trainee after assignment?
  • What are the two ASOS types?
  • Runway length is determined by which factor?
  • Under what conditions are special markings (slants through zeros and lines under 's') required?
  • What is the purpose of Information Signs?
  • How is the Surface Wind pronounced?
  • Which phrase is appended after the digits to indicate Local Time?
  • What is the primary purpose of Taxiway Center Lead-Off Lights?
  • Runway holding positions are typically used on taxiways which intersect a runway or go through which area?
  • Which description best matches Hold Position Markings For ILS?
  • The code CFC in military aircraft branch codes represents which service?
  • What acronym represents the five functions facility recorders provide?
  • Which pattern indicates you are above the glide path?
  • How many digits are used to express General Time?
  • What features does a Type 2 compass calibration pad include?
  • What is an arresting gear?
  • Which statement correctly describes the ILS hold marking adjacency?
  • What does the Visual Information Display System (VIDS) do?
  • What is the correct spoken form for Flight Level 310?
  • On a four-light PAPI configuration, which combination indicates you are on the correct glide path?
  • Which description correctly characterizes the Runway Centerline Lighting System (RCLS) pattern?
  • The DASI reading is displayed on which display?
  • Which item is NOT part of the VIDS interface list?
  • Threshold lighting consists of red/green bidirectional lights with green facing the approach zone. What color faces the approach area?
  • How is Speed pronounced?
  • What do mandatory signs look like and what do they mark?
  • ASOS transmits its range in nautical miles as which value?
  • Describe location signs.
  • How is General Time pronounced?
  • How far can the VASI be seen during daytime and at night?
  • Which statement is true about runway centerline markings on basic runways?
  • What type of arresting gear is used on Navy/Marine Corps airfields and what are its capabilities?
  • On precision approach runways, how far do ALS lights extend?
  • What color are threshold markings on a displaced threshold?
  • What does the equipment suffix "/G" mean?
  • What is a wind indicator used for?
  • In the unnamed NAVAID fix instruction, which word explicitly indicates the distance to the fix?
  • In military aviation, which service does the code R designate?
  • What does the prefix "L" represent?
  • Which mission prefix represents Special Air Mission?
  • In Surface Wind pronunciation, what word is placed between the direction digits and the speed digits?
  • Time Checks are typically rounded to which precision?
  • Which component in the unnamed NAVAID fix instruction designates the unit of distance used for the fix?
  • What does the equipment suffix "/S" mean?
  • Which runway marking category is used for precision instrument runways?
  • Describe the Enhanced Terminal Voice Switch (ETVS) (AN/FSC-127).
  • Which item is recorded on the 7230-4 to document emergencies?
  • What does 4 white on 2-bar VASI indicate?
  • What color is the taxiway centerline?
  • Which information should Status Boards display?
  • How are Frequencies pronounced?
  • The code VV in military aircraft branch codes represents which service?
  • Which ATC elements use local time?
  • What is counted as one operation for the Air Traffic Activity Manager?
  • Touchdown Zone Lights (TDZL) consist of two rows of steady-burning white lights placed how far from the threshold and extending to where?
  • Which ATC elements use UTC time?
  • How are altitudes pronounced?
  • What does the prefix "F" represent for a military mission prefix?
  • What do Direction Signs indicate?
  • Dashed taxiway edge markings consist of broken lines of what length and gap?
  • Define a displaced threshold.
  • What is the ball commonly called on MOVLAS?
  • How do you pronounce Field Elevation?
  • What is the proper procedure for making an adjustment on a Flight Process Strip?
  • Describe VIDS.
  • FAA Form 7230-10 is used as which type of log?
  • Describe the Flight Data Input/Output (FDIO)/Personal Computer Based-Remote Control Unit (PC/RCU).
  • How is Local Time pronounced?
  • The code VM in military aircraft branch codes represents which service?
  • The letter C in military aircraft branch codes represents which service?
  • Which sign indicates you are at a taxiway intersection with direction to the intersecting taxiway?
  • On a PAPI, a configuration of two red and two white means you are:
  • Where should clocks be located in ATC facilities?
  • On Navy airfields, what is distinctive about the wind indicator sock?
  • What is the phraseology for the False Information Alert?
  • What are the 3 Parts of the FDIO?
  • What is the third item listed under Capacity Potential?
  • The time recorded on the 7230-4 is in which time standard?
  • What does Red over White indicate on VASI?
  • What is the typical maximum duration of ATIS messages?
  • Which ATIS content item represents a readback instruction?
  • What is the fifth item listed under Capacity Potential?
  • For clocks not on VIDS, when are time checks conducted?
  • What is the fourth item listed under Capacity Potential?
  • Describe the centerline on taxiways.
  • Which description best matches ILS hold position markings?
  • What are the typical PAPI visibility ranges during day and night?
  • In civilian aircraft designation, which letters indicate MEDEVAC and Air Taxi respectively?
  • Who is involved in the Secondary Alert System?
  • What does CAF stand for in clearance abbreviations?
  • The first entry on the 7230-4 must indicate which information?
  • How often does the DASI sample occur?
  • Threshold lights are operationally connected to which of the following lighting systems?
  • Aeronautical beacons are operated during which period?
  • Which code is used to denote a Straight-In Approach?
  • What is the width of runway centerline markings on precision instrument runways?
  • Which of the following is NOT one of the five functions facility recorders provide?
  • Which of the following is a valid label used when indicating frequency in kilohertz?
  • Which mission prefix corresponds to Air Mobility Command?
  • What are the proper markings for temporarily closed runways?
  • What is the Emergency Communications System (ECS)?
  • Which color on a 2-bar VASI indicates you are above glide path?
  • Which statement best describes the purpose of a light gun when radio communications are unavailable?
  • How are runway numbers determined?
  • How do General Time and Local Time differ in pronunciation?
  • What does the mission prefix "S" represent?
  • What is the second item listed under Capacity Potential?
  • Which of the following is NOT a priority among the four message priorities?
  • Which visual landing aid is used as the standard system for carrier landings?
  • What do runway holding position markings look like?
  • How is a displaced threshold marked?
  • What is the width of the taxiway centerline?
  • What information does a Runway Location Sign display?
  • What is the preferred method of refueling?
  • What is the color scheme and purpose of a Taxiway Location Sign?
  • Prior to release, ATIS messages should be reviewed for which criteria?
  • Length and width of each dashed taxiway edge marking.
  • Runway Centerline Lighting System (RCLS): The last 3000 feet of the centerline alternates red and white, and the last 1000 feet are red. Which statement is true about the color of the last 1000 feet?
  • Which pattern indicates you are below the glide path?
  • What does the term 'November' signify for Aircraft Identification?
  • Which code corresponds to the United States Marine Corps in aircraft branch codes?
  • Which of the following is NOT a component of the Segmented Circle Visual Indicator System?
  • Edge lights are bidirectional white and turn yellow on the last 2000 feet in the approach direction. True or False?
  • The code CTG in military aircraft branch codes represents which service?
  • From sunset to sunrise, ALS is used for which scenario?
  • What is the second item listed under Capacity Potential?
  • What does Red over Red indicate on VASI?
  • Which equipment suffix indicates No Mode C?
  • Who must consent to the release of recordings?
  • Which item is recorded on the FAA 7230-4 by the supervisor?
  • What is the purpose of the runway centerline markings?
  • What is the complete list of the six types of signs on airfields?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy